Sunday, August 3, 2008

Mounting Devices on Linux

Before accessing a hard disk or any other storage medium in Linux or UNIX they should be mounted. Note that there is no concept of mounting in windows platforms. Mount allows you to merge two file systems. Mounting of file systems are done with mount command.

The figure shows the unix file system before mounting and after mounting.

The Mount command
Mount command has many options and hence little complex. But most of the time you will be able to mount file systems easily with few options. Mount command takes following general format.
mount -t filesystem_type -o mount_options /dev/device_file /mnt/mount_point

Usually we don't specify t option because kernel can usually identify the file system type by looking at partition table. The o options are also optional.We can unmount a device by it's device file name or by the mount point.
#umount /dev/sda
#umount /mnt/flash

Mounting a CD ROM/DVD ROM
Following command tells the kernel to auto detect (t auto) file system type and mount the device /dev/cdrom on /mnt/cdrom.
#mount -t auto /dev/cdrom /mnt/cdrom

If mounting fails, check whether you have a /mnt/cdrom directory, you can do it by using ,
#ls -l /mnt/cdrom

If it is not there then create it,
#mkdir /mnt/cdrom

Now try the mount command if it fails again check whether you have /dev/cdrom. If it does not exist, try
#dmesg | grep -i cdrom to find out the device file.

Now you can retry the command assuming that /dev/hdb is your CD ROM drive.
#mount -t auto /dev/hdb /mnt/cdrom.

Mounting a floppy, USB drive and windows partition
You can mount floppy as root user with following command.
#mount -t auto /dev/fd0 /mnt/floppy

If you get any error follow steps given earlier.
For USB drive, as root user
#mount -t vfat /dev/sda1 /mnt/usb

If you get any error follow steps given above. If you still get error saying that /dev/sda is not a valid block device then check whether the disk is partitioned. You can do this with fdisk command.
#fdisk -l /dev/sda

If you still find problems restart your hotplug sub system and remove and reinsert the device.
#/etc/init.d/hotplug restart

When mounting DOS/Windows partitions first make sure whether it is fat formated or ntfs the following commands can be used.
#mount -t vfat /dev/hda1 /mnt/windows
#mount -t ntfs /dev/hda5 /mntwinxp

If you want to mount so that all users can read and write, you may want to try:
#mount -t vfat -o user,rw,exec,umask=000 /dev/hda1 /mnt/c

“-o user,rw,exec,umask=000” gives every body all the permission to all the files on your partition.

Mounting a loopback device
Create a file containing all zeros. A 10MB file.
#dd if=/dev/zero of=myblock.img bs=1k count=1024

Now attach this to loop back device and format.
#losetup /dev/loop0 myblock.img
#mkfs -t vfat /dev/loop0

Now we can mount the device by using the file as the device.
#mount -o loop myblock.img /mnt/loop

How can you allow a normal user to mount a device?
All you have to do is adding an entry to the /etc/fstb file It has the following format.
<file> <mount> <type> <options> <dump> <pass>
/dev/sda1 /mnt/usb vfat user,rw 0 0


Prabath Ariyarathna said...

Nice Article ... Very usefully, I think you are interesting about Linux.

Prabath Ariyarathna said...


can you explain "where is the mounting details are store in Linux file system????"

Saatvi said...

hi prabath...

It is stored in /etc/fstab or /etc/mtab. This is a plain text file that stores default mount settings for various file systems. When Linux is booting up, it uses the settings in this file to determine what file systems should be mounted automatically.

Prabath Ariyarathna said...

Hi ...

Very Cool answer.I'm very happy to girls are join with Linux(Great).Well Done.If you can please refer about SAMBA server and Open LDAP servers.I think it is very help full to improve you're knowledge about file system and authentication.Anyway well done,, keep going, put some more article about